Here is our pcb fabrication, FPC fabrication and pcb assembly capabilities include but not limited to what are listed below, as we are updating our equipments constantly to keep us on the cutting edge. If your projects demands are beyond these capabilities, please drop us an E-mail, we will respond within 24 hours.

Items		Technical Specifications	Remarks
File required		Gerber RS-274X Format；ODB; Common EDA's like .pcb,.brd	Pls list your EDA software name and version to avoid conversion mistake
Base material		PI; PET; Cu
Flexible insulator		PI : 1/2mil(12.5um) to 5mil (127um) PET: 1/2mil(12.5um) to 5mil (127um)
Conductor		(Copper) Rolled Annealed (RA) Electrodeposited (ED)	thickness: 1/3oz(12um) to 6 oz(200um)
Adhesive		Acrylic adhesive	thickness: 1/2mil (12.5um) to 3 mil (760um)
		Adhesiveness materials
Solder mask	PI PET	Covered in layers PI and PET film
	Resist Oil	Solder Mask resist oil (Green,Black,Yellow,White)	thickness:12-18um
Stiffener		PI PET thickness:0.075-0.3mm	Must be shown on design
		FR4 thickness: 0.2-3mm
		steel thickness :0.075-0.5mm
Rigid -Flexible		PI+FR4	thickness: 3 mil to 125 mil
Surface Finish	Tin	Immersion Tin
	Gold	Immersion Gold thicknees: 0.025-0.05um Electrolytic Hard Gold thickness:>0.05um	Immersion Gold is commonly used
	Silver	Immersion Silver
	OSP	Organic Solderability Preservative
Shielding		Black Electromagnetic Film Required to limit Electromagnetic and/or Electrostatic
Impedance		impedance tolerance:+/-10%
Layers		1 to 8 layers(Flexible ,Rigid-Flexible)
Board size		Max size:1420 mm*400 mm Min size:2.5 mm*2.5 mm
Outline tolerance		Hand trim tolerance:+/-0.2 mm
		Cutter dies tolerance:+/-0.2 mm
		Punch dies tolerance :+/-0.075 mm
		Laser cut tolerance :+/-0.05 mm
Min hole dimension	Drilling (P.T.H)	Machine Drilling: ￠ 0.15 mm Laser Drilling: ￠ 0.05 mm
	Punching	￠ 0.50 mm
Tolerance of bronze coated hole		±0.05 mm
Conductor	Min width and tolerance	Min width: 1.5 mil ,Tolerance :+/- 15%
	Min spacing and tolerance	Min Spacing: 1.5 mil Tolerance :+/- 15%
Pad		Min pad>:0.25 mm
Stiffener holes		Min stiffener holes:>0.2 mm
Peeling strength		1.0 KGF/CM（Adhesive copper） 0.5 KGF/CM(Adhesiveness copper）
Color of oil		Applicable to silk printing in multi colors(white,black,yellow,blue)

● PCB Assembly Capabilities

ITEMS		Technical Specifications	Remarks
File Required		Gerber RS-274X Format; ODB; Common EDA's like .pcb,.brd BOM sheet Pick and place file